|
|
本帖最后由 flyingspur 于 2013-11-5 13:29 编辑
看看bolt炸成什么样子。我同意这个人的观点：人总有犯错误的时候，一旦出事宁可枪管炸掉，而不是枪栓往后飞打进脑袋里。。。这个事件发生以后，Blaser还是悄悄改进了容错设计
http://www.thestalkingdirectory.co.uk/showthread.php/501-So-you-want-a-Blaser-look-at-this-first
![]()
The event happened in Germany and was investigated by the German equivalent of our proof house. Their conclusion was yes the owner did do something stupid home loading and this lead to the failure of the rifle. (This was not a one off event other rifles have failed) In response to this Blaser did not do a product recall they redesigned there rifles and ones made after September 2002 had as follows:-
Dual Ball Detents (CF body only)
Longer Body –
There is more "meat" to the body due to the need for better tolerances when the bodies need to be polished.
There is a bolt safety feature that will not allow the bolt to come flying out if the bolt pin snaps. New laser engraved logos.
Serial numbers starting at 2001.
The bolt is longer to distribute wear better.
Now you may say serves him right, it was not the rifles fault, but Blaser have admitted a degree of blame by changing the design have they not. You may say that you would never make a mistake when reloading but remember the following:-
“The Man who never made a mistake never made anything”
“To eer is to be human”
“Nobody is perfect, are you nobody?”
My point is if I did do something stupid or something went wrong I do not want the bolt to be the weakest link, I would want the barrel to blow, you might loose a finger or at worse a hand but not half your head and your eye as the bolt fly’s back. I would rather a rifle fail as below.
![]() |
|
[复制链接]
发表于 2013-11-5 12:46
楼主
