tp9sfx铁瞄有问题？

dp33

新枪入手，直接换了Freedomsmith trigger，ghost 6lb firing pin spring. 手感极佳，昨天开苞打了两三百发，没遇到任何firing feeding问题。但是。。。但是shoots high and right. see attached for 15yard 10 round group. point of aim was the sticker.
如果只是windage就自己调了，这个elevation不会搞啊，应该要canik给调吗？这虽说不是target pistol，但也差的有点远啊。网上也搜到几个说factory sights偏的。

FJC

换前瞄，上红点

dp33

客服已经回复了，也说要给个前瞄让我自己换。这个前瞄换多高的他们能估计的准吗？而且我也没有sight pusher，想让他们给我换。红点倒是早晚要买的，暂时没啥deal，先玩一阵铁瞄。

FJC

dp33 发表于 2018-8-21 09:47
客服已经回复了，也说要给个前瞄让我自己换。这个前瞄换多高的他们能估计的准吗？而且我也没有sight pusher ...

玩铁瞄又追求准，这个是必经之路

大部分人打不准，不关心这个，手一抖 low left 没准还正中靶心

dp33

客服又回信了，有道理吗？

to be honest I shoot ALOT and all my firearms have the 3 dot system. When I used my Canik I was off right away. I was high and right (I am left handed) and after 3 mags I figured out what I was doing (and bought trijicon sights) but even some sort of markings such as home done 3 dots might help (2 dots on the rear).

How I tested my theory at the range was this. I brought it in all the way to 5 yards. Used a different pistol, dead on. Then tried the Canik, bout dead on. moved to to 7, then to 10. each time I noticed theyd drift up and right, while my other firearm was still dead center, which told me it was me.

I would personally suggest applying some sort of home done white dots on the back to give a point of reference. That, or another easy way is to make sure it is not loaded and safe, then aim in the comfort of your home and maybe use a mirror to see if the barrel is pointed up or down and that also might help you determine if it is the firearm, or those sights playing tricks on you.

Believe it or not, alot of people prefer blacked out sights, however I do not. They really threw me off and I believe the same might be happening to you. If there is a problem with the front sight, I will happily bring it in. However if there is not, youll get a new front sight the same way it was 4-6 weeks later back at square one.

RenlinZhang

我的也有类似问题 直接换dawson 铁瞄， s&w front , full adjustable glock rear, 问题解决

dp33

RenlinZhang 发表于 2018-8-21 09:39
我的也有类似问题 直接换dawson 铁瞄， s&w front , full adjustable glock rear, 问题解决 ...

如果不换前瞄只换个glock后瞄可以吗？是不是不喜欢canik前瞄太瘦

CiTY_HuNTeR

没注意到问题，不过我打的不多，才开苞一次，没觉得偏或者高

RenlinZhang

dp33 发表于 2018-8-21 10:04
如果不换前瞄只换个glock后瞄可以吗？是不是不喜欢canik前瞄太瘦

貌似不行， 我做了很长时间research。 后瞄只能用glock的，而原厂前瞄太矮和dawson glock 可调后瞄不配。 Dawson 网站有明确说明匹配前瞄高度的。

txcowboy

的确准星有问题。我那枪一开始也是偏高，而且偏左。偏左容易校正，把准星往左边砸就是了

txcowboy

偏高的问题，我不想等原厂邮寄新零件过来。我想到的办法是把照门挫矮一些，效果是一样的。

dp33

txcowboy 发表于 2018-8-29 20:44
偏高的问题，我不想等原厂邮寄新零件过来。我想到的办法是把照门挫矮一些，效果是一样的。

...

多谢回复。我也搜到了这个办法，考虑了一阵，还是寄回去了，让他们搞了。反正最近太忙也没空玩。