$10 的AK 刺刀适合作野外生存刀么？

oldben

哪位大大有空给科普一下？
56半刺刀用的是合金钢，硬度在HRC60左右，据说可以在玻璃上划出痕迹来。
即使这个刀设计的比56半的早，也应该不会差很多吧？


Yugoslavian AK M70 & M76 Bayonet with Yugo Scabbard. Very good condition
$9.95
http://www.jgsales.com/yugoslavian-ak-m70-m76-bayonet-with-yugo-scabbard.-very-good-condition-p-3159.html


这个没有刀鞘的才卖 $3.99：
Romanian AKM-47 Bayonet, no scabbard, Good condition. One. Used.
http://www.jgsales.com/romanian-akm-47-bayonet,-no-scabbard,-good-condition.-one.-used.-p-2947.html

graycat2006

不适合，没开刃，钢好像也不好。不过可以自己磨磨看。

happydad

不是没用，有总比没有好。
真到了野外生存的时候，一块铁片也是宝贝呀。

oldben

graycat2006 发表于 2013-12-6 08:01
不适合，没开刃，钢好像也不好。不过可以自己磨磨看。

谢谢回复。
钢不好就没有磨的动力了。原来还想买几把送给朋友玩呢。

xushihuai

一分钱一分货。。。估计在野外随便劈劈树枝就卷刃了

oldben

SHTF: The Best Budget Survival Knife


There are a bazillion survival knifes on the market that are excellent quality and the price reflects it. But if you are on a tight budget, and who isn't, check out the AK47 Bayonet.
From $8 - $15, it's a fantastic option.

Quality Steel Blade
Sturdy Sheath
Cutting, Piercing, Stabbing, Digging
Wire cutters
Insulated for cutting electric fences
Saw Teeth for cutting
Steel pommel for field hammer
Bayonet for AK47

kevinwu

oldben 发表于 2013-12-6 08:36
SHTF: The Best Budget Survival Knife

I like the AK bayonet, you can sharpen that fairly easy using an electronic sharpener.

oldben

kevinwu 发表于 2013-12-6 11:16
I like the AK bayonet, you can sharpen that fairly easy using an electronic sharpener.

电动磨刀器我倒是有，不知道磨好后刀刃的锋利和持久如何，如果和您家里的菜刀相比？

kevinwu

oldben 发表于 2013-12-6 11:25
电动磨刀器我倒是有，不知道磨好后刀刃的锋利和持久如何，如果和您家里的菜刀相比？

I think it is good enough. In fact, I sharpened one of my AK bayonets and it can easily chop off small branches in my backyard and the blade never got hurt. But that bayonet is more like a straight knife version like the one in the attached picture.

oldben

我在1楼 那个Yugo 的是AK47 二代的，60年代中期出来的。

您这个是AK74的，80年代出来的，用的钢应该比AK47 二代的好，而且刀柄的材料好很多。
这里卖 $29， 也有卖到100+的。
http://www.atlanticfirearms.com/ ... etail.html?Itemid=0

AK-74 Bulgarian 6x5 Bayonet Review

jawcn

warsaw pack里面，除了毛子自己的钢还可以以外，其他都是垃圾。国产的钢材这两年稍微好点，以前就是垃圾中的垃圾