|
Rack Grade以下,还真的有两级。现在还有货。都是把枪管,枪栓,撞针都焊死了,不能发射任何子弹,只能把玩,展示。
http://thecmp.org/cmp_sales/rifle_sales/m1-garand/
M1 GARAND DRILL RIFLES
$450
Drill rifles are sold “as is” in store only when available
Fits the description of our Rack Grade with the additions of: gas cylinder lock screw is welded to lock and gas cylinder, barrel is drilled, plugged and welded at chamber mouth. Barrel is welded to the receiver, firing pin hole is welded closed on bolt face. Rifle wear will be exhibited by worn and mixed colors of the finish; there may be some pitting on the metal parts; wood will be basically sound but may be well used with minor hairline cracks, poor fit, and many dings, scratches and gouges; wood may not match in color, type of wood or condition. Wood may be Walnut, Birch, Beech or other variety.
RM1DISPLAY M1 Garand Display Rifle (non functioning) $750
RMA3DISPLAY M1903 Display Rifle (non functioning) $750
The non-functioning, non-firing M1 Garands and 1903A3s came to CMP from the Army as a welded up, non-functioning, non-firing drill rifles. No rifle sold by CMP, as non-functioning, non-firing, was rendered non-functioning, non-firing by CMP. The CMP does not take functioning rifles and make them non-functioning. The receivers are welded to the barrel, bolt face is welded up, and barrel is plugged and welded. The rifles have been nicely refinished and assembled with Walnut stock and placed on a beautiful hardwood stand for office display. These rifles are Army relics suitable for remembrance and presentation.
|
|