XDs vs PPS and P30 vs PPQ

brucewayne · 发表于 2014-1-2 18:24

happyfrog 发表于 2014-1-2 21:14
So this made me lean towards polymer gun.

本来塑料和金属摩擦就比较滑嘛，金属和金属就涩了

brucewayne · 发表于 2014-1-2 18:25

happyfrog 发表于 2014-1-2 21:13
The first 750 rounds were fine, no problem. But got 3 FTE in these 100 rds. I bought 1000 rds from ...

炫耀贴，哈哈

happyfrog · 发表于 2014-1-2 18:56

brucewayne 发表于 2014-1-2 18:25
炫耀贴，哈哈

I thought the famous p226 should do better than this, 3 fte in just 1000 rds.

alex · 发表于 2014-1-2 18:58

happyfrog 发表于 2014-1-2 17:54
Blazer FMJ 9mm 115 grain

这靶场最普通的弹了。我没碰到过啥问题。不过有哥们不是碰到过底火装反的么。。。

happyfrog · 发表于 2014-1-2 19:02

alex 发表于 2014-1-2 18:58
这靶场最普通的弹了。我没碰到过啥问题。不过有哥们不是碰到过底火装反的么。。。 ...

The three malfunctions(FTE) were all because the ejected shell jammed in the chamber. I would imagine it could happen to new gun when the spring was stiff(or lub was not enough), but I already shot 750 rds of the same batch of ammo, with no problem.

alex · 发表于 2014-1-2 19:07

happyfrog 发表于 2014-1-2 19:02
The three malfunctions(FTE) were all because the ejected shell jammed in the chamber. I would imag ...

搁太久不打，人记仇了。

brucewayne · 发表于 2014-1-2 19:24

happyfrog 发表于 2014-1-2 21:56
I thought the famous p226 should do better than this, 3 fte in just 1000 rds.

我从来没遇到这问题啊，连打脑门都没有过的，退壳杠杠的，钢壳都打过

		自动登录	找回密码
密码			立即注册

[实践射击] XDs vs PPS and P30 vs PPQ

开坛元勋

NRA终身会员

认证教员

携枪执照