非移民签证在加州可否自制AR Pistol?

Tank-Tank

外星人就不要碰灰色地带了, 尤其加州

Tank-Tank

楼主啊, ar pistol根本没有featureless说法的. 还有你做枪的时候有没有拍视频, 有没有single shot, 有没有刻字上去

Tank-Tank

1437 发表于 2018-1-30 22:13
permanently fixed magazine啊

这些都知道, 但加州人民都称这为maglock. featureless我们认知是鱼翅把, 残废
就怕楼主往ar手枪上加鱼翅把那些

Tank-Tank

Arminius 发表于 2018-1-30 22:34
说错了，pistol上的是Maglock。另一把16寸的做的是featureless. 做了single shot, 拍了照片，没拍视频。

...

好像是做好了要刻上做好的日子跟生产商(自己名字?)

Tank-Tank

Arminius 发表于 2018-1-30 23:12
名字，城市，口径，序列号。

兄弟记得申请号码注册哦, maglock的应该是下一年注册也可以.

Tank-Tank

idee 发表于 2018-1-31 15:26
暂时还不需要申请，自己的也行，名字城市型号口径等。7/1/18开始？

7-1-18之前是要注册好攻击武器... 不是开始注册. maglock以及任何80%做好的枪下一年都要注册. 加州手里还有80%别做了, 卖外州算了. 有的就是麻烦

Tank-Tank

Arminius 发表于 2018-1-31 18:34
依当前法律，home made的枪只要在7-1-18之前造好就是永远无须注册的。当然，即便在截止日期之后完成，证 ...

• AB 857 requires that all finished firearms must bear a serial number by January 1, 2019.
• You can still buy 80% completed lowers, but you only have until July 1, 2018, to mill them into finished lowers before you’ll have to report them to the California Department of Justice.
• The law states that if you finish an 80% lower receiver after July 1, 2018, you need to apply for a serial number from the California DOJ, pay a fee, and then engrave that serial number on your lower within 10 days, or face a misdemeanor charge.
• If you do finish your 80% lower before the July 1, 2018 deadline, you’ll still have to engrave it with a valid serial number (one which meets the ATF’s requirements) but you won’t have to report the receiver or the serial number to the California DOJ or the ATF.
  

还有一个, 被DOJ拒绝不能买枪的千万不能自己做80%