加共80% Lower 要在2018年7月1日前完成问题

dimsum

在加共80% Lower 要在2018年7月1日前完成, 意思是要钻好, 还是要做好completer lower, 或是完成整枪complete lower 和 upper 呢?

Vincent11357

欲加之罪何患无辞

mosaics

terminal2000

你说的是做成残废版，然后80%必须上序列号这事吧？

oopes

这里有说明

https://www.80percentarms.com/pages/faq

要在7月1号前做好，还要加serial number，不过这个号码在7月1号前你可以自己随便起，但是要符合ATF的serial number要求，如果你是7月1后买lower 80%就要向ATF先申请serial number才能开始动手弄。
WHAT ARE ATF REQUIREMENTS FOR SERIALIZING A LOWER?

First, home built rifles for personal use are not required by federal law to have serial number. However, some people wish to engrave one anyway, or you may be required to engrave one if you live in California (see above).

For firearms manufactured in the United States by a commercial firearms manufacturer, federal law requires the following information to be present:

• A serial number (must not duplicate another serial number you have used before)
• Caliber. Most people write “Caliber: Multi”.
• Manufacturer's name. Generally this would be your first and last name.
• Manufacturer’s city and state. This would be the city and state in which you live.
• (Optional) If you have decided to assign a model number to your 80% lower, you must engrave it onto the lower. If you have not elected to make up a model number, you do not have to engrave one.
  

The above information must be engraved to a depth of .003 inches and the text size must be at least 0.125 inches high.

Hachi

其实我到现在都不确定，glock80必须要做出栓动的还是正常的加序列号

dimsum

oopes 发表于 2018-2-9 22:25
这里有说明

https://www.80percentarms.com/pages/faq

我知道是要laser engrave serial #, 但不确定是不是7月1日前整把枪（lower upper stock, 能发射）要做好。

taurus

各位大侠，在加州完成以后的lower可以做成AR Pistol吗？谢谢

idee

dimsum 发表于 2018-2-10 09:50
我知道是要laser engrave serial #, 但不确定是不是7月1日前整把枪（lower upper stock, 能发射）要做好 ...

据说按联邦法81%就算firearm